| 3140 RTV |  | General-purpose coating in laboratory and field. Elevated-temperture use. |
| 3145 RTV | | Thicker than 3140 RTV. Good cable anchor. |
| Barrier E | | Butyl rubber a??patcha??. No curing required. |
| Barrier J II | | Single component silicone. Short term water emersion. |
| Barrier WD | | Pre-softened wax with paste consistency. Similar to W1. |
| GageKote #1 | | Single component, high temperarure coating. Often used as a precoat. |
| GageKote #11 | | Moisture protection for ceramic cement installations. |
| GageKote #5 | | Two component polysulfide. Good mechanical protection and chemical resistance. |
| GageKote #8 | | Fast drying acrylic of used for leadwire anchoring in transducers. |
| M-Bond 43-B | | Hard coating with excellent chemical, electrical and mechanical resistance. |
| M-Bond AE-10 | | Hard, water-resistant coating. |
| M-Bond AE-15 | | Hard, water-resistant coating. |
| M-Bond GA-61 | | Good chemical and mechanical protection at elevated temperatures. |
| M-Coat A | | General-purpose laboratory coating. |
| M-Coat B | | Secondary coating as vapor barrier. |
| M-Coat C | | Low reinforcement coating. Elevated temperature use. |
| M-Coat D | | General-pupose laboratory moisture barrier. Intrabridge wiring anchor and insulation. |
| M-Coat F | | Field applications where conditions are not ideal. No curing required. |
| M-Coat FBT | | Low reinforcement coating for commercial transducers. |
| M-Coat J | | General-purpose coating for harsh environments. |
| M-Coat W1 | | Best water barrier, but poor mechanical protection. |
| Series | Description |
